Air Rider 
Add On   
Baker Built
Electrical Connection
Emgo 
Kisan
Muth Signal Mirrors
Progressive Springs
Rivco Products

All American Products

Back to Home Page

Kisan Tailblazer 25LED-D

GL1800 2001-2010

79.95 

25LED-D unit is designed for Goldwing GL 1800 models with the spoiler LED light-bar.

Dual function unit - it powers the LED light-bar with low intensity as a Running Light, and upon brake activation it flashes the light-bar at full intensity.

 

When you apply the brakes the brake light will modulate fast at first then slow down to a solid On over a four second period.


Internal circuitry is controlled by a microprocessor. The microprocessor allows for customizable features. The microprocessor can be programmed to adjust intensity of the Running Light feature.

 

Kisan Tailblazer 200GW

GoldWing Universal Trunk Lights (Splice-in)

74.95

200GW.jpg (97270 bytes)

200GW unit is designed for all Goldwing models. It is also a universal model which requires a (1) wire splice-in.
200GW unit is a heavy-duty unit which will flash up to (6) brake light bulbs when the brakes are applied.
200GW unit mounts under the seat.
Motorcycle Safety Foundation (MSF) suggests that you pump your brakes at each stop. tailBlazer
does it automatically, and by flashing the bulb filament at maximum brightness.
As soon as you tap your brakes, drivers behind you will see a rapid flash of the brake lights. This sudden flashing invokes immediate attention.
The internal circuitry is controlled by a microprocessor, which allows precise flash patterns, overload detection and reverse polarity protection.